DJI Phantom 3 Standard Reset to Restore Default Settings – Are you experiencing issues with your DJI Phantom 3 Standard drone? Perhaps it’s not functioning as expected or displaying abnormal behavior. In such cases, reset can often resolve these problems and restore your drone’s stability. Fortunately, resetting a DJI Phantom 3 Standard is a relatively straightforward process that can be done in a few simple steps.

To begin with, it’s essential to understand what a reset entails. Resetting the DJI drones essentially means restoring the drone to its factory settings. This action eliminates any customized configurations or preferences you may have set and clears any temporary system glitches causing the issues at hand. It’s important to note that performing a reset should only be done after exhausting other troubleshooting options.

To initiate the DJI Phantom 3 Standard reset, start by powering on the drone. Once it’s powered on, locate the small reset button near the battery compartment on the back of the aircraft. Using a small, pointed object such as a paperclip or a pin, press and hold the reset button for about five seconds.

While resetting, ensure the aircraft is powered on, and the battery is properly inserted. This ensures that the reset process can be completed successfully. After approximately five seconds, release the reset button. The DJI Phantom 3 Standard will then begin the reset process, indicated by a series of blinking lights on the aircraft. Be patient; the reset process may take a few moments to complete.

Once the reset is finished, the DJI Phantom 3 Standard will restart, and you’ll notice that all custom settings and configurations have been erased. However, this will also include any potential issues that may have been causing trouble. The reset effectively restores the drone to its original state, which can often resolve problems such as connectivity issues, unresponsive controls, or abnormal behavior during flights.

DJI Phantom 3 Standard Reset Tutorial

DJI Phantom 3 Standard reset is a simple yet effective troubleshooting technique that can help resolve most issues you may encounter with your drone. Restoring the aircraft to its factory settings eliminates the possibility of customized settings causing conflicts and clears temporary system glitches.

1. Backup and Power Off

Before initiating the reset process, it is essential to back up any important files or media stored on your DJI Phantom 3 Standard. This includes photos, videos, and flight logs once you have made a backup, power off the drone by pressing and holding the power button on the battery.

2. Reset Remote Controller

The next step is to reset the remote controller. Turn on the remote controller and locate the small reset button on the back. Press and hold the reset button for approximately five seconds using a paperclip or similar tool. Release the button and wait for the remote controller to restart.

3. Reset Aircraft

Now it’s time to reset the aircraft. Turn on the DJI Phantom 3 Standard drone and wait for the status lights to stabilize. On the remote controller, simultaneously press and hold the left shoulder button and the right shoulder button. While holding the buttons, push the left joystick to the bottom position and then to the top position. Release the joystick and the shoulder buttons, and wait for the aircraft to restart.

4. Reconfigure and Test

After the reset process is complete, you will need to reconfigure your DJI Phantom 3 Standard drone. This involves connecting your mobile device to the remote controller and following the on-screen instructions in the DJI Go app. Once reconfigured, it is essential to test the drone by performing a short test flight in a safe and open area to ensure everything is functioning correctly.

By following this DJI Phantom 3 Standard reset tutorial, you should be able to resolve various issues and start afresh with your drone. Remember to always back up your data before performing a reset and take proper precautions during the process. If you encounter any difficulties or have specific questions, refer to the official DJI support documentation or contact the DJI support team for assistance. Enjoy your DJI Phantom 3 Standard drone!

Troubleshooting, Errors, and Problems

The DJI Phantom 3 Standard is a popular and reliable drone that offers various features for aerial photography and videography. However, like any electronic device, it can encounter issues that may require a reset. This guide will discuss troubleshooting tips, common errors, and problems associated with resetting the DJI Phantom 3 Standard.

Troubleshooting Tips

If you are experiencing issues with your DJI Phantom 3 Standard that necessitate a reset, follow these troubleshooting tips before proceeding with a reset:

  • Check the battery: Ensure that the battery is inserted correctly, charged, and not damaged. Faulty batteries can cause various performance issues.
  • Verify the remote controller: Ensure that the remote controller is connected to the drone and functioning correctly. Check the batteries and ensure that the controller’s range is not obstructed.
  • Calibrate the compass: Compass calibration is essential for accurate flight and positioning. Use the DJI Go app to calibrate the compass before taking off.

Common Errors and Problems

If the troubleshooting tips don’t resolve the issues you are facing, you may need to perform a reset. Here are some common errors and problems that may necessitate a DJI Phantom 3 Standard reset:

  • System glitches: Sometimes, the drone’s system may encounter software glitches that cause performance issues or prevent proper operation. A reset can often resolve such problems.
  • Firmware update failure: If a firmware update fails or doesn’t install correctly, it can result in connectivity issues or erratic behavior. A reset may help to rectify these problems.
  • Control signal loss: If you frequently experience a loss of control signal between the remote controller and the drone, a reset can help to re-establish a stable connection.


So there you have it! Reset your DJI Phantom 3 Standard can be a handy troubleshooting tool in case you encounter any issues or want to start fresh. Following the steps we’ve discussed, you can reset your drone and get back to soaring through the skies in no time. Thanks for taking the time to read our guide; we hope it has been helpful to you.

Leave a Comment