DJI Mavic Pro Reset: Your Ultimate Guide & Troubleshooting – The DJI Mavic Pro is a versatile, high-performance drone that has gained immense popularity among aerial photography enthusiasts and professionals. However, there may be instances where you encounter issues or inconsistencies with the drone’s performance, prompting you to consider a DJI Mavic Pro reset.

Resetting the Mavic Pro can help resolve various problems, including software glitches, connection issues, and other operational malfunctions. Before diving into the reset process, it is essential to understand the implications of resetting your drone. Resetting the DJI Mavic Pro means that all your personalized settings and configurations will be erased, and the drone will revert to its original factory settings.

This includes camera settings, flight modes, and other personalized features. Therefore, it is crucial to back up any essential data or settings before resetting. To reset your DJI Mavic Pro, you must first power on the drone and the remote controller. Ensure the remote controller and the drone are connected and within range.

It is crucial to note that the reset process may take a few minutes, and during this time, it is essential to keep the drone and remote controller powered on and connected. After the DJI Mavic Pro reset process, you must restart the drone and the remote controller. Once the reset is successful, you will notice that all personalized settings have been erased, and the drone will be restored to its original factory settings.

At this point, you can start reconfiguring your drone’s settings according to your preferences. It is advisable to take your time and carefully adjust the settings to optimize your drone’s performance and ensure a smooth flying experience.

Reasons for DJI Mavic Pro Reset

The DJI Mavic Pro is a highly advanced and innovative drone designed for aerial photography and videography enthusiasts. However, like any electronic device, it may experience occasional glitches or issues that require a reset to restore it to its optimal performance. This section will explore why you might need to reset your DJI Mavic Pro.

Software Malfunctions

One of the common causes for a DJI Mavic Pro reset is software malfunctions. The sophisticated software that powers the Mavic Pro can sometimes encounter errors or bugs that lead to performance issues. These malfunctions may manifest as freezing, unresponsive controls, or connection problems. To resolve such issues, a reset can help clear any software conflicts and restore the drone to its default settings.

When encountering software issues, it is advisable to perform a standard or hard reset depending on the severity of the problem. A standard reset involves power cycling the drone by turning it off and on again. In contrast, a hard reset typically involves a more elaborate procedure to restore the device to factory settings. These resets can fix minor software glitches and provide a fresh starting point for troubleshooting.

Hardware Calibration

Another reason for conducting a DJI Mavic Pro reset is calibrating the hardware components. Calibration is essential to ensure accurate flight data and sensor readings, which are crucial for a safe and secure flight. Calibration ensures that the drone’s internal gyroscope, accelerometer, and compass are aligned and functioning correctly.

Calibration issues may arise due to air pressure changes, accidental mishandling, or a sudden impact. If you notice your Mavic Pro drifting during hover or experiencing inconsistencies in altitude or orientation, it may indicate that a hardware component needs calibration. Following the manufacturer’s instructions for resetting and calibrating the drone can help resolve these issues and improve flight stability.

Stuck or Unresponsive System

Sometimes, a DJI Mavic Pro may become stuck or unresponsive, and a reset is necessary to bring it back to normal operation. This can occur when the firmware encounters an error, the drone software crashes, or when there is a power surge or external interference. A reset can help troubleshoot and recover the drone from such situations, allowing you to resume flying without any hindrance.

It is important to note that before performing a reset, you should back up your flight data and settings to avoid losing important information. This allows you to restore your preferred configurations once the reset process is complete.

DJI Mavic Pro Reset Tutorial

If you are a proud owner of the DJI Mavic Pro, you might encounter situations where performing a reset becomes necessary. Knowing how to reset your drone can save you time and frustration, whether due to a software glitch or performance issues.

Resetting your DJI Mavic Pro can resolve various issues, including erratic behavior, connectivity problems, and software glitches. By resetting your drone, you can restore it to its original state, eliminating any potential bugs or errors affecting its performance. Following the reset process before contacting customer support for assistance is always recommended.

1. Prepare for the Reset

Before resetting, ensure your DJI Mavic Pro’s battery is fully charged. This will prevent any interruptions during the reset process that could lead to further complications. Additionally, make sure to remove the propellers for safety purposes.

2. Access the Remote Controller Settings

Power on your DJI Mavic Pro and the remote controller. Then, using the USB cable, connect the drone to your mobile device, where you have the DJI Go 4 app installed. Open the app and navigate to the remote controller settings.

3. Initiate the Reset

In the remote controller settings, locate the option for “Reset Settings” or a similar term. When you find it, tap on it to initiate the reset process. A warning prompt may appear, asking you to confirm the reset. Proceed with the confirmation, and the reset process will begin.

4. Complete the Reset

Once the reset starts, the DJI Mavic Pro will automatically power off and restart several times. It is crucial to allow the drone to complete this process without interruption. This might take a few minutes, so exercise patience. After the reset process is complete, the drone will power back on.

5. Post-Reset Configuration

Once your DJI Mavic Pro has been reset, you must reconfigure some settings to personalize your flying experience. Use the DJI Go 4 app to set your preferred flight modes, camera settings, and any other preferences you had before the reset.

Troubleshooting, Errors, and Problems

The DJI Mavic Pro is a popular and highly capable drone that enables users to capture stunning aerial footage and enjoy the thrill of flying. However, like any electronic device, it may occasionally encounter issues that require a reset to restore functionality. This article will cover common troubleshooting steps, errors, and problems related to resetting the DJI Mavic Pro.

Troubleshooting Steps

  • Power Cycle: If your DJI Mavic Pro is unresponsive or experiencing unexpected behavior, perform a power cycle. Start by turning off the drone and the remote controller. Disconnect the battery, wait for a few seconds, then reconnect it. Turn on the remote controller, followed by the drone, allowing them to establish a connection.
  • Firmware Update: Outdated firmware can cause various issues. Ensure that your DJI Mavic Pro runs the latest firmware version by connecting it to your computer’s DJI Go mobile app or DJI Assistant 2. If an update is available, follow the instructions carefully to install it.
  • Remote Controller Calibration: If you’re encountering control issues, it may be necessary to calibrate the remote controller. Access the remote controller settings in the DJI Go app or DJI Assistant 2 and follow the on-screen instructions for calibration.

Common Errors and Problems

1. Connection Issues

If you’re experiencing connection problems between the DJI Mavic Pro and the remote controller or mobile device, try the following:

  • Ensure the remote controller’s battery is fully charged and within the drone’s range.
  • Verify that the USB cable connecting the mobile device and the remote controller is in good condition and securely connected.
  • Restart the DJI Go app, the mobile device, and the drone and remote controller, as described in the troubleshooting steps above.

2. Gimbal Malfunction

The gimbal is a critical component that stabilizes the camera, and if it malfunctions, it can affect the quality of your footage. To troubleshoot gimbal issues:

  • Ensure that no physical obstructions or debris are affecting the gimbal’s movement.
  • Calibrate the gimbal through the DJI Go app or DJI Assistant 2. Follow the calibration instructions carefully.
  • If the gimbal problem persists, contact DJI Support for further assistance.

3. GPS Signal Weak or Lost

If your DJI Mavic Pro is experiencing GPS signal-related issues, follow these steps:

  • Fly the drone in an open, unobstructed area away from tall buildings, trees, and electromagnetic interference sources.
  • Ensure that the drone’s GPS antennas are undamaged and securely attached.
  • Calibrate the compass before the flight by following the instructions in the DJI Go app or DJI Assistant 2.


And that’s all there is to know about resetting your DJI Mavic Pro! If you ever find yourself in a situation where a reset is needed, simply follow the easy steps mentioned in this guide. We hope this information has been helpful and that you can now confidently reset your drone whenever necessary.

Leave a Comment